Neewer 2.4GHz 3-IN-1 Wireless Flash/Studio Flash/Camera Trigger for Canon

Description

Store Home
New Arrival
Ending Soon
Add to Favourites
View Feedback
Contact us
Store Categories
Cameras & Photo
Musical Instruments & Gear
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Categories
Why Buy From us
Neewer Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash/Camera Trigger
Items Description
Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash Trigger with Remote Shutter for Canon Rebel T3 XS T4i T3i T2i T1i Xsi EOS 1100D 1000D 700D 650D 600D 60D 550D 500D 450D 100D, EOS 1D Mark IV 1D Mark III 5D Mark III 5D Mark II 50D 40D 30D 20D 7D 6D 5D
- Neewer Wireless Flash Trigger for Canon
- The Neewer Photo wireless flash trigger receiver and transmitter can serve you in a multitude of functions.
- To use this set as a wireless remote control, plug in the included C-Cable to both the receiver and your camera's compatible input. Make sure the receiver's and the transmitter's switches are set to "CAMERA" mode and then use the transmitter to wirelessly autofocus and take pictures.
- Similarly you can employ a wired remote method simply by plugging in the C-Cable to the transmitter alone and proceeding to use this without the receiver.
- Finally, if you wish to use this pack for wireless flash / studio flash triggering purposes, first attach the transmitter to your camera's hot shoe mount. Attach your flash to the hot shoe mount of the receiver and make sure the switches are set to "FLASH" mode and you can proceed to position the flash however you desire and take photos normally.
- Features:
- Frequency: 2.4Ghz
- Operating Distance: up to 25m.
- 16 Selectable Channels.
- 1/4" Tripod Mount.
- Sync Speed: 1/250 second.
- Power Supply: 2x alkaline AAA batteries
Wireless Frequency System: 2.4GHz
Operating Distance: up to 25meters
16 Selectable Channels
Also Compatible with: Pentax K200 K110D Super, K110D, K100D, K20D, K10D, K-7, K-5, Kr, Kx, Mz-6, Mz-L
Includes: Wireless Camera Flash Trigger and Camera Remote Control Function (1 Transmitter, 1 Receiver) + C1 camera cable + C3 camera cable + Flash Sync Cable + PC Sync Cord + Sync Adapter
1X Transmitter
1
X
Receiver
1
X
C1 camera cable
1
X
C3 camera cable
1
X
Flash Sync Cable
1
X
PC Sync Cord
1
X
Sync Adapter
1
X Manual
I
nstruction
Shipping
Payment
Terms of Sale
Condition and Warranty
Contact us
Only ship to
US
.
Within US : Free
ONLY ship to PayPal shipping address.
(Please make sure your PayPal shipping address is correct before finalizing order and submitting payment. We only ship to the shipping address submitted with the payment!)
No APO/FPO address, please. No local pick up.We don't ship to Hawaii, Guam, Alaska or Virgin Islands， Puerto Rico.
We accept
PayPal
only.
Returns without original box will NOT be accepted.
Buyers pay return shipping cost.
Please make the payment within
7 days
after winning the auction.
All sales are final. Warranty is provided via advertised warranty provider. Seller will assist with replacement only if item is defective within the warranty conditions.
If an item is received damaged, seller must be notified within
2 business days
of this damage. 5%-15% restocking fee will be charged if item is NOT defective or damaged.
Be sure shipping address with payment is correct. Seller CANNOT change the shipping address after payment.
*NO EXCEPTIONS!*
This item is
100% Brand New
. Never used. It comes with
2 Months Warranty by Seller
.
The warranty enables the buyer to receive warranty repair or replacement from the term length described in the sale. Situations
NOT
covered by this warranty include physical damage to the item (dropping/impact damage, water damage, exposure to extreme heat/cold/pressure, etc), misuse, negligence, normal wear and tear, installation of non-factory software, or any other damage caused by use in a reckless or careless manner. The warranty guarantees the item will be free from manufacturer caused defect for the warranty length stated in this sale. Please contact our customer service team to claim your warranty if and when it should be needed.
Please feel free to contact us by sending eBay message. We will reply you with 24 hours.
Your comment is very important in our business success, If you are satisfied with the items and our service, please take a minute to give us a positive feedback. Please leave us 5 star feedback. If you are not satisfied with any of the items, please contact us before leaving neutral or negative feedback.
We could resolve the problem,because we believe everything could be resolved through communication, THANK YOU!
Copyright© All Rights Reserved.
2.4 GHz Reduced Interference Frequency
Range Up to 320' / 100m
Individual/Group Wireless Flash Trigger
Up to 3 Light Groups/7 Grp Combinations
Flash Sync Speed of Up to 1/320s
Dual-Function Shutter Release Button
LED Indicators
Batteries are included!
The
FreeWave Fusion Wireless Flash Trigger & Remote Control
from
Vello
is a versatile, reliable remote control kit that will trigger off-camera flash units and studio lights from up to 300 feet away. It can be used to configure up to three different light groups, which can be triggered individually or simultaneously, for a total of seven different combinations, using its multiple groups feature. Simultaneous triggering of multiple light groups requires additional FreeWave Fusion Receivers (available separately).
The FreeWave Fusion also provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos or long exposures, where the slightest camera movement can ruin a picture. Working on the 2.4 GHz frequency gives you reduced radio interference and an extended range (up to 320' / 100m) - you don't need to have line-of-sight alignment, either, as radio waves will pass through walls, windows and floors.
Note:
Since the FreeWave Fusion does not transmit TTL settings, use of a flash or light unit with full manual control is recommended. You will need to set the power output manually.
The FreeWave Fusion is compatible with most cameras, flash units and studio lights. However, for flash wake-up functionality and/or high shutter speeds, you will need full Nikon TTL support via your camera, flash and FreeWave Fusion trigger.
This remote does not provide high-voltage sync protection, and is not recommended for use with flash units that have a trigger voltage of more than 6V.
*Buyer pays for returns for items shipped internationally.*