Gitzo Tripod & Head - Heavy Duty

Description

Gitzo Tripod & Head - Heavy Duty. Condition is "Used". Shipped with USPS Priority Mail.
This tripod is used and shows signs of wear, but it functions well.  Legs loosen and tighten fine and center column adjusts smoothly.  The head also shows signs of wear, but tilts and pans soothly and rotates 360 degrees.
It is heavy duty and was used with large format, 4X5 and 8X10 cameras, and was used in my commercial photo studio in the 90's and early 2000's.  It has been in storage since then.  it is made of the Gitzo aluminum alloy which was the material used by Gitzo before 1994.
We are Leofoto Authorized Dealer.
All  Model Leofoto Gears Include 10 Years Warranty.
Leofoto PG-1 Professional Gimbal head
Product specifications
Base Diameter: 76mm / 3in
Panning Clamp: Gimbal Head
Length: 200mm / 7.9in
Height: 245mm / 9.6in
Width: 76mm / 3in
Weight: 1kg / 2.2lb
Max. load: 25kg / 55lb
Overview
Travel lightly with the 2.2 lb black Leofoto PG-1 Gimbal Head, which is constructed from T6061 aluminum. Along with your lightweight tripod, this allows you to travel longer distances with your setup comfortably. The gimbal head enables you to capture fast-moving subjects with a large and heavy telephoto lens that otherwise you could not do with just hand holding the lens.
The head's arm swings back and forth and can be locked down at its required angle, and the camera platform, which is Arca-type compatible, has a height adjustability of 3.9" to help balance a telephoto lens on the head. Future setups can be repeated because of the printed scale on the side of the swing arm. Also, on the side of the arm are 1/4"-20 sockets for accessories such as an articulating arm. The 9.7" tall head can easily hold up to 55.1 lb of equipment and rotate a full 360° while keeping the horizon straight using the bubble level at the base of the head.
In the Box
*Leofoto PG-1 Gimbal Head (Black)
*Quick Release Plate
*Allen Wrench