DSLRKIT RF-16NE 2.4Ghz Wireless Flash Trigger for CANON w/ 4 Receivers

Description

DSLRKIT RF-16NE Wireless Remote Flash Trigger
for Canon
(This SET include 1 Transmitter and 4 Receivers)
Extra receivers if you need:
RF-16NE RX Wireless Flash Trigger Receiver for CANON
DSLRKIT RF-16NE use the same system with Pixel PAWN TF-361/362/363/364,It means you can use RF-16NE TX to trigger the PAWN RX or use RF-16NE RX work with PAWN TX.
This flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture. The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.
Transmitter has a 3.5mm input socket witch can connect with your camera’s PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.
Receiver has a 3.5mm output socket. It can be use to connect your camera’s shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).
And as you can see, in addition to those function, it also have an umbrella holder.
So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.
RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.
Features
1.
Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.
2.
Flash sync speed is up to 1/250s.
3.
Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.
4.
Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)
5.
Supports to control multiple flashguns and studio lights at same time.
6.
Shutter function mode, included single, continuous, bulb and 4sec delay shooting.
7.
Supports to control multiple cameras to take shots at the same time.
8.
Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)
9.
Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.
10.
Low voltage design, it's able to use rechargeable batteries.
11.
Power supply use 2*AAA batteries.(transmitter and receiver)
12.
With umbrella holder
Functions
Type:
Using FSK 2.4GHz Wireless Remote Control System
Operation
Range
:
100 meters
Channel:
16
Shutter release
Half-perss, Full-press
Transmitter stand-by time:
2 years or >10000 Timer (2x AAA alkaline cell)
Receiver stand-by time:
45 Hours(2x AAA alkaline cell)
Dimensions ( W x L x H):
Transmitter: 76mm x 36 mm x 35mm
Receiver:
76mm x 61 mm x 38.7 mm
Weight:
Transmitter: 50 g (with battery)
Receiver:
60 g (with battery)
1.Wireless flash trigger mode:
Transmitter compatible with the device under flash trigger mode:
Model
Compatible device
RF-16NETX
for Canon
Canon EOS: 1D series, 5D series, 7D, 6D
60D, 50D, 40D. 30D, 20D, 10D,
650D,600D,550D, 500D, 450D, 400D, 350D,
1100D, 1000D
Rebel T4i,T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,
Powershot G10, G11, G12.G15 G1X SX50
RF-16NETX
for Nikon
Nikon: D7100 D7000, D5200 D5000, D5100, D3200,D3100, D3000, D600
D4 D3X D3, D800E D800,D700, D2 series, D300 series, D200,
D90, D80s D70 series, D60, D50, D40 series, F6,
Nikon i-TTL COOLPIX: COOLPIX8800, COOLPIX8400, COOLPIX P5000, COOLPIX P5100,COOLPIX P6000
FUJI
: S5 Pro,COOLPIX A COOLPIX P7700
Receiver compatible with the device under flash trigger mode:
Model
Compatible device
RF-16NERX
(for CANON)
Canon
Speedlite: 600EX-RT,580EX II, 580EX, 430EX II, 430EX, 270EX, 220EX
(Compatible with other brads for CANON TTL flash)
RF-16NERX
(for NIKON)
Nikon: SB-900, SB-700, SB-800, SB-600,
(This item is not compatible with SB-400),
(Compatible with other brands for NIKON TTL flash)
NOTE:
Compatible with other brands flash (Wake up can only used in TTL Compatible flash)
moreover,receiver can connect more flashes:
2.Wireless Flash trigger via 3.5-PC Sync cord :
(NOTE: this mode can not support 1/250sec sync, max to 1/200sec.)
(NOTE: This mode will lose Flash wake up function.)
3.Wireless Remote Control mode:
(The shutter control mode included single, continuous, BULB and 4sec delay shooting.)
Compatible with the device under shutter release mode:
Model
Plug
Compatible device
RF-16NE
Receiver
3.5-E3
Canon 650D,60D, 600D, 550D, 500D, 450D, 400D, 350D,1100D, 1000D
Rebel T4i,T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,
Powershot G10, G11, G12.G15 G1X SX50
3.5-N3
Canon EOS: 1D series, 5D series, 7D, 6D 50D, 40D. 30D, 20D, 10D
3.5-DC0
Nikon: D3 series, D2 series, D800E D800,D700, D300 series, D200.D4 D3X
Fujifilm: S3 Pro, S5 Pro.
Film SLR
Nikon F6 F5 F100 F90 / F90x N90 / N90x
3.5 -DC1
Nikon: D80, D70, D70S
3.5-DC2
Nikon: D7100 D7000, D5200 D5100, D5000, D3200,D3100, D90.D600
4.Wireless studio light trigger mode:
Package Included:
RF-16NE (Transmitter) x1
RF-16NE (Receiver) x4
3.5mm to 3.5mm studio flash cable x4
3.5mm jack to 6.35mm plug x4
Receiver holding mount x4(The holding mount is for studio lamp. It has double tape sticker)
Receiver Hot shoe protection cover x4
English User Manual x1
Notice:No retailing Box,pack safely in Bubble bag
Below accessory you need to order seperately:
RF-16NE RX Wireless Flash Trigger Receiver for CANON
3.5mm to FLASH PC Sync Cable for ROOK RF-16NE RF-603
J3.5-30/N3 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/E3 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/DC2 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/DC0 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
Godox X2T-C TTL Wireless Flash Trigger for Canon, Bluetooth Connection, 1/8000s HSS,5 Separate Group Buttons, Relocated Control-Wheel, New Hotshoe Locking, New AF Assist Light
Description
The Godox X2T is the second generation of the X1T trigger and has many new features. With buttons to select specific groups and built-in Bluetooth for smartphone power control. Godox X2 Series TTL wireless flash trigger can work with Godox camera flashes, outdoor flashes and studio flashes with built-in Godox X wireless radio system. X2 achieves stable, reliable and effective real-time signal transmission which makes it a good choice for photographers who have various lighting demands. SIGNIFICANT NEW FEATURES: Quick Access Group ButtonsFast Group ManagementBuilt-in Bluetooth for Smartphone APP ControlPro 1/10th of a Stop Manual PrecisionOption of Fraction of Full or Whole Number Power Range ReadoutMac and PC Firmware UpdatableLarger Main Control DialGlobal and Individual Modeling Light Power ControlAudio Function Control Via Individual GroupsHigh Sync Delay Setting Menu OptionUpdated Display and FunctionsALL Button - Adjusts Manual Groups, OnlySlide clamp hotshoe lockClear Channel Scan for purest signal strength Compatibility for Smarphones, Cameras and Flashes 1. Compatible Smartphone Models (This Table Only Lists the Tested Smartphone Models, NOT All Smartphones. For the compatibility of other Smartphone models, a self-test is recommended.) iPhone 6S, iPhone 6S Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus iPhone 8, iPhone 6 Plus, iPhone 6, iPhone X; Samsung galaxy S8, Samsung galaxy Note8, Samsung galaxy S9HUAWEI P9, HUAWEI P10, HUAWEI P10 Plus, HUAWEI Mate 9 Pro, HUAWEI Mate 9, HUAWEI Mate 10 Pro, HUAWEI Mate 10, HUAWEI P20, HUAWEI P20 Pro 2. Compatible Camera Models (This table only lists the tested camera models, not all Canon EOS series cameras. For the compatibility of other camera models, a self-test is recommended.) Please Note1: The cameras which are released before 2012 do not have TTL mode in their D and E group. Please Note2: 1500D(2000D/T7), 3000D(4000D): When the high-speed shutter is higher than 1000, there will be lunimance edge on the photo.1Dx Mark II, 1Dx, 5Ds/5Dsr 5DⅣ, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 6D MarkII, 77D, 800D 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, 450D, 400D Digital 350D, DIGITAL 100D, 1200D, 1000D, 1100D, M5, M3, EOS R, M50, 1500D(2000D/T7), 3000D(4000D) 3. Compatible Flash Models (Please Note: Supported Functions should be both owned by X2T-C and flashes.) No Extra Receiver Needed: AD600 series/AD400 series/AD360II series AD200 series/V860II series/V850II, V350C/TT685 series/TT600/TT350C QuickerII series/QTII/SK II series, DP II series/GSII X1R-C as Receiver: 600EX-RT/580EXII/580EX/430EXII V860CXTR-16 as Receiver: AD360/AR400(The flashes with Godox wireless USB port), Quicker series/SK series/DP series/GT/GS series/Smart flash series(Can only be triggered)XTR-16S as Receiver: V860C V850 Special Features HSS (High- speed sync): Yes Second-curtain sync: Yes Flash exposure compensation: Yes, ±3 stops in 1/3 stop increments Flash exposure lock & Focus assist: Yes Modeling lamp: Control the modeling lamp globally or individually Audio Beep: Yes Wireless Shutter: Acts as receiver to control the camera trigger through the 2.5mm sync cord jack Firmware upgrade: Upgrade through the Type-C USB port Memory function: Settings are stored 2 seconds after the last operation & recovered after a restart Physical Properties Display: A large LCD panel, backlighting on or OFF Dimension: 72X70x58 Net Weight(g): 90 Specifications Flash Exposure Control TTL autoflash: E-TTL II Manual flash: Yes Stroboscopic flash: Yes Wireless Flash Transmission range (approx.): Up to 328ft / 100m Built-in wireless: Godox X 2.4GHz Modulation mode: MSK Channels: 32 Wireless ID: 01-99 Groups: 5 TTL and Manual Read more Built-in Bluetooth for APP Control You can connect the X2 to your phone or tablet via Bluetooth after download the "GodoxPhoto" APP, then control the flash mode, power output, the modeling light mode, the beep of Godox flashes, and etc. It is extremely useful when doing product photography in the studio while the radio trigger is hard to reach on the top of the camera. Fully Support TTL Autoflash and Pro Functions Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, control of the modeling lamp, adjusting all groups' output value simultaneously, ect. Smart TTL-Convert-Manual Function X2T can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode. Effectively Avoid Signal Interference With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same 1/256 Minimum Power Output The minimum power output can be precisely set to 1/256 in 1/10 step adjustment. One-Shot and Multi-Shot Setting The newly added scan function can help automatically detect the channel with the least interference. Type-C Connection The MicroUSB has been upgraded to a Type-C. Type-C sockets are just much more solid than microUSB, as are the cables. They’re less prone to being damaged or bent. And you can now upgrade the firmware ether in Windows or Mac system. New user interface, Dedicated Group Buttons Starting on the top, we can see that there are five new buttons, labelled A through E denoting the five groups of flashes you are able to control. These will offer quick and easy access to adjust the settings for a specific group at the push of a button. Relocated Control-Wheel The dial is positioned in the bottom of the left-hand corner so as not to obstruct the LCD panel of the camera, which should allow easier spinning. Quick Lock Hot- Shoe Godox X2T has the new hotshoe locking mechanism as like as the Godox V1, which automatically locks, and a button to quickly unlock and twist it open to remove it. New AF Assist Light The X2 has a new AF assist light that uses visible light instead of a red/infrared pattern. So, a certain brand of camera should find it a little easier to use autofocus in the dark now.
Features:
|Built-in Bluetooth for APP Control|: You Can Connect the X2T-C to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera
|TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups' Output Value Simultaneously, ect.
|New User Interface, Easy to Operate|: LCD with Clear Display Effect, With 5 Group Setting Buttons, and 3 Function Buttons to Realize Quick Setting. Relocated Control-Wheel. New Hotshoe Locking Mechanism. New AF Assist Light that Uses Visible Light Instead of A Red/Infrared Pattern. USB-C Connection that is More up to Date and More Reliable than A MicroUSB
|Effectively Avoid Signal Interference|: With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same
|3.5mm Sync & USB Type-C Port|: It can work as a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Canon Speedlights Trigger/ Flash Trigger with 3.5mm Sync Cord Jack
Product Details:
Package Dimensions: 5.9 x 4.8 x 3.1 inches
Item Weight: 7 ounces
Date First Available: May 21, 2019
Manufacturer: Godox X2T Canon
Shipping
Most orders will be shipped within 1 business days once we receive your payment. Except on weekend or public holidays.
A shipping notification will be emailed to you once your order has been shipped.
International shipping via eBay Global Shipping Program.
No shipping to AK, HI, PR, APO/FPO, US Protectorates and PO Box.
Payment
We Accept Payment Via PayPal and All Major Credit Cards.
Return
We stand behind our products. Items can be returned for exchange or full refund within 30 days from the date you receive your merchandise.
Return shipping is the responsibility of buyer unless the return is a result of our mistake (i.e., your receive the wrong item). We will pay for shipping replacement back to you if an exchange of the same product is requested.
Contact us
If you have any questions please contact us. We respond within 1 business day or less.