DSLRKIT RF-16NE 2.4Ghz Wireless Flash Trigger for CANON w/ 3 Receivers

Description

DSLRKIT RF-16NE Wireless Remote Flash Trigger
for Canon
(This SET include 1 Transmitter and 3 Receivers)
Extra receivers if you need:
RF-16NE RX Wireless Flash Trigger Receiver for CANON
DSLRKIT RF-16NE use the same system with Pixel PAWN TF-361/362/363/364,It means you can use RF-16NE TX to trigger the PAWN RX or use RF-16NE RX work with PAWN TX.
This flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture. The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.
Transmitter has a 3.5mm input socket witch can connect with your camera’s PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.
Receiver has a 3.5mm output socket. It can be use to connect your camera’s shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).
And as you can see, in addition to those function, it also have an umbrella holder.
So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.
RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.
Features
1.
Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.
2.
Flash sync speed is up to 1/250s.
3.
Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.
4.
Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)
5.
Supports to control multiple flashguns and studio lights at same time.
6.
Shutter function mode, included single, continuous, bulb and 4sec delay shooting.
7.
Supports to control multiple cameras to take shots at the same time.
8.
Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)
9.
Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.
10.
Low voltage design, it's able to use rechargeable batteries.
11.
Power supply use 2*AAA batteries.(transmitter and receiver)
12.
With umbrella holder
Functions
Type:
Using FSK 2.4GHz Wireless Remote Control System
Operation
Range
:
100 meters
Channel:
16
Shutter release
Half-perss, Full-press
Transmitter stand-by time:
2 years or >10000 Timer (2x AAA alkaline cell)
Receiver stand-by time:
45 Hours(2x AAA alkaline cell)
Dimensions ( W x L x H):
Transmitter: 76mm x 36 mm x 35mm
Receiver:
76mm x 61 mm x 38.7 mm
Weight:
Transmitter: 50 g (with battery)
Receiver:
60 g (with battery)
1.Wireless flash trigger mode:
Transmitter compatible with the device under flash trigger mode:
Model
Compatible device
RF-16NETX
for Canon
Canon EOS: 1D series, 5D series, 7D,
60D, 50D, 40D. 30D, 20D, 10D,
650D,600D,550D, 500D, 450D, 400D, 350D,
1100D, 1000D
Rebel T4i,T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,
Powershot G10, G11, G12.G15 G1X SX50
RF-16NETX
for Nikon
Nikon: D7100 D7000, D5200 D5000, D5100, D3200,D3100, D3000, D600
D4 D3X D3,D800E D800,D700, D2 series, D300 series, D200,
D90, D80s D70 series, D60, D50, D40 series, F6,
Nikon i-TTL COOLPIX: COOLPIX8800, COOLPIX8400, COOLPIX P5000, COOLPIX P5100,COOLPIX P6000
FUJI
: S5 Pro,COOLPIX A COOLPIX P7700
Receiver compatible with the device under flash trigger mode:
Model
Compatible device
RF-16NERX
(for CANON)
Canon
Speedlite: 600EX-RT,580EX II, 580EX, 430EX II, 430EX, 270EX, 220EX
(Compatible with other brads for CANON TTL flash)
RF-16NERX
(for NIKON)
Nikon: SB-900, SB-700, SB-800, SB-600,
(This item is not compatible with SB-400),
(Compatible with other brands for NIKON TTL flash)
NOTE:
Compatible with other brands flash (Wake up can only used in TTL Compatible flash)
moreover,receiver can connect more flashes:
2.Wireless Flash trigger via 3.5-PC Sync cord :
(NOTE: this mode can not support 1/250sec sync, max to 1/200sec.)
(NOTE: This mode will lose Flash wake up function.)
3.Wireless Remote Control mode:
(The shutter control mode included single, continuous, BULB and 4sec delay shooting.)
Compatible with the device under shutter release mode:
Model
Plug
Compatible device
RF-16NE
Receiver
3.5-E3
Canon 650D,60D, 600D, 550D, 500D, 450D, 400D, 350D,1100D, 1000D
Rebel T4i,T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,
Powershot G10, G11, G12.G15 G1X SX50
3.5-N3
Canon EOS: 1D series, 5D series, 7D, 6D 50D, 40D. 30D, 20D, 10D,
3.5-DC0
Nikon: D3 series, D2 series, D800E D800,D700, D300 series, D200.D4 D3X
Fujifilm: S3 Pro, S5 Pro.
Film SLR
Nikon F6 F5 F100 F90 / F90x N90 / N90x
3.5 -DC1
Nikon: D80, D70, D70S
3.5-DC2
Nikon: D7100 D7000,D5200 D5100, D5000, D3200,D3100, D90.D600
4.Wireless studio light trigger mode:
Package Included:
RF-16NE (Transmitter) x1
RF-16NE (Receiver) x3
3.5mm to 3.5mm studio flash cable x3
3.5mm jack to 6.35mm plug x3
Receiver holding mount x3(The holding mount is for studio lamp. It has double tape sticker)
Receiver Hot shoe protection cover x3
English User Manual x1
Notice:No retailing Box,pack safely in Bubble bag
Below accessory you need to order seperately:
RF-16NE RX Wireless Flash Trigger Receiver for CANON
3.5mm to FLASH PC Sync Cable for ROOK RF-16NE RF-603
J3.5-30/N3 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/E3 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/DC2 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/DC0 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
Store category
Sign Up Now !
You may also like
YONGNUO 2 Sets YN622N 1/8000s Slave TTL Flash Trigger For NIKON SB800 SB900 S600
Product Description
Yongnuo First Wireless i-TTL Flash Trigger YN-622 N is Released now, it's designed for Canon Camera.
Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL ( II ), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres.
It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, iTTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.
Specification:
a), Support Full iTTL Pass-through function when on camera
1), Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode.
2), Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode.
Note: Speedlites on hot-shoe of transmitter support ITTL II / Manual / Multi
b), Shutter Sync
1), High-speed Synchronous
The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed.
2), 1st. Curtain Sync
3), 2nd. Curtain Sync.
c), Remote Control Function
The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly.
d), Supporting mixed mode.
With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. ( you need to set the parameters on speedlites )
Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite.
e), Awaking function
When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. ( for those flash has wake up function )
f), Zoom Function
Zoom Automatic: length will be charnged depanding on the changes of lens.
Zoom Manual: Zoom length is within 24 - 105mm
Zoom Lock
g), Support Single-contact of camera and flash triggering ( the max. Sync. speed is 1/250s )
You can use it with Nikon camera or Nikon flash, but you just need to set up YN-622C in manual mode.
h), Flash Fire Ratio with iTTL
You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver.
i), Support 2pcs AA batteries, ( 1.2v rechargeable battery ), Stand-by time is 60hours.
j), Dimension: 89.5 * 53 * 39MM, net weight is 78g.
Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash.
Suit for Camera:
Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D900,D3000, D3100, D3200, D5000, D5100, D5200, D7000, D7100
Flash compatible (i-TTL): SB400, SB600, SB700, SB800, SB900, SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N
Package contains:
4 x YN-622N transceivers
1 x Instruction in English and Chinese
1 x Original Yongnuo Box
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal only. No surcharge.
we are PayPal verified seller. You will feel easy and safe to do business with us.
We only ship to the confirmed address provided by PayPal.
Payment must be received within 3 days after the auction closed.
The item(s) will be sent to your Paypal address ONLY, please make sure your address is right.
Delivery details
Note： if the item location on USA , UK or Australia address， we will send it by USPS,Fedex or Royal mail,Australis Post etc As shipping way with Free Tracking number
.
USA 2-8 days Arrive, UK 2-4 days
Delivery
.
United States / United Kingdom / Australia 　7-12 working days
Canada 　7-25 working days
Brazil / South America 　may take up to 15-35 Days due to strict Custom Inspection
Italy / France / Spain / Germany/ Eastern Europe 　may take up to 15-35 Days due to strict
★
This information is provided by the carrier
and excludes weekends and bank holidays. Note that delivery times may vary, particularly during peak periods.
★
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
Terms of sales
if product no defect, but buyer ask for return, we must be deduct 20% as the restock fee from payment,then agree return.
Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
Please
repack the item carefully
. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
If the item is found non-defective, the item will be sent back to the buyer at buyer's expense
. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned in.
We not responsible any customs duty and import tax.
About us
Our working time:
China time
: Monday to Friday 9:00 am to 6:00 pm.
We do not work on holidays in China
if you send email to us, it will be reply within 1 working days .
Contact us
If you are not satisfied with the product or service ,
please contact us
and don't give us negative or natural feedback,We must give you a satisfactory solution
.